Products
Get to market first with S2C solutions

General Peripherals

The General Peripherals provides SoC/ASIC with many common interfaces such as USB, PCIE, PCI, Gigabit Ethernet. The Mictor interface module provides the Prodigy Logic Module with a convenient probe to connect to the Agilent logic analyzer.

Prodigy ETM4 Module

Prodigy ETM4 Module

  • One ARM ETM4 interface

  • One ARM JTAG interface

  • One 9-pin UART interface

  • One 3-pin UART interface

  • One SD card socket

  • One Micro SD card socket

  • Occupies one Prodigy I/O connector


The General Peripherals provides SoC/ASIC with many common interfaces such as USB, PCIE, PCI, Gigabit Ethernet. The Mictor interface module provides the Prodigy Logic Module with a convenient probe to connect to the Agilent logic analyzer. The D-MAX interface module provides the Prodigy Logic Module with a convenient probe to connect to the Tektronix logic analyzer.

Prodigy GPIO Extension Module

Prodigy GPIO Extension Module

  • Two RS232s interfaces

  • Two I2C interfaces

  • One Mictor-38 connector

  • One ARM JTAG interface

  • 8 LEDs, 4 push buttons & 8 Switches

  • Two 20*2 pin headers

  • 2 channels of SerDes through MMCX connectors 

  • Occupies one Prodigy I/O connector


Prodigy Processor Peripheral Module

Prodigy Processor Peripheral Module

  • One NAND Flash socket

  • One NOR Flash socket

  • One SPI Flash socket

  • One I2C EEPROM socket

  • One MicroSD card socket

  • One ARM JTAG connector

  • One ARM ETM debugger trace connector

  • Two I2C interfaces

  • 4 LEDs, 4 Switches and 10 Pin Headers

  • Occupies one Prodigy I/O connector


Prodigy PCI Interface Module

Prodigy PCI Interface Module

  • Provide a 32-bit 3.3V PCI Edge Connector

  • Occupies one Prodigy I/O connector


2 Channel USB2.0 OTG PHY Interface Module

2 Channel USB2.0 OTG PHY Interface Module

  • Support host, device and OTG mode

  • x2 16bits UTMI interface & x1 8bits ULPI interface

  • 2x5 Pin Headers on board 

  • 3 LEDs on board 

  • 2 Push Buttons

  • Occupies one Prodigy I/O connector


Prodigy 3 Channel RGMII PHY Interface Module

Prodigy 3 Channel RGMII PHY Interface Module

  • 10/100/1000 BASE-T IEEE 802.3 compliant

  • Support for RGMII Interface

  • Full integrated digital adaptive equalizers, echo cancellers and crosstalk cancellers

  • Two-wire Serial Interface and MDC/MDIO

  • CRC checker, packet counter

  • Auto-calibration for MAC interface outputs

  • Occupies one Prodigy I/O connector


Prodigy 3 Channel GMII Interface Module

Prodigy 3 Channel GMII Interface Module

  • 10/100/1000 BASE-T IEEE 802.3 compliant

  • Support GMII Interface

  • Full integrated digital adaptive equalizers, echo cancellers and crosstalk cancellers

  • Two-wire Serial Interface and MDC/MDIO

  • CRC checker, packet counter

  • Auto-calibration for MAC interface outputs

  • Occupies one Prodigy I/O connector


Customized Prodigy Min-SAS Module

Customized Prodigy Min-SAS Module

  • Convert 136 GPIOs between two Prodigy connectors

  • Convert 4 SerDes from Prodigy connector to Mini-SAS connector

  • Support synchronous and asynchronous reference clock

  • Support 10 ~ 810MHz programmable clock as reference clock

  • Support 6 SIDEBAND signals for Mini-SAS connector

  • No external power supply needed

  • Occupies one Prodigy I/O connector


Prodigy 6 Channel SGMII Interface Module

Prodigy 6 Channel SGMII Interface Module

  • 10/100/1000 BASE-T IEEE 802.3 compliant

  • Support 2 channels RGMII Interface and 4 channels SGMII Interface

  • Full integrated digital adaptive equalizers, echo cancellers and crosstalk cancellers

  • Two-wire Serial Interface and MDC/MDIO

  • CRC checker, packet counter

  • Auto-calibration for MAC interface outputs

  • Occupies one Prodigy I/O connector


Prodigy 6 Channel GMII Interface Module

Prodigy 6 Channel GMII Interface Module

  • 10/100/1000 BASE-T IEEE 802.3 compliant

  • Support 2 channels RGMII Interface and 4 channels SGMII Interface

  • Full integrated digital adaptive equalizers, echo cancellers and crosstalk cancellers

  • Two-wire Serial Interface and MDC/MDIO

  • CRC checker, packet counter

  • Auto-calibration for MAC interface outputs

  • Occupies one Prodigy I/O connector


Multi-FPGA JTAG Chain Tool Kit

Multi-FPGA JTAG Chain Tool Kit

  • Supports to chain JTAG ports of up to 8 Xilinx FPGA Modules of Prodigy LS into one JTAG Chain


RS232 Interface Module

RS232 Interface Module

  • Two RS232 interfaces

  • Application of voltage standards to RS232 interface

  •  3.0V

  •  1.8V

  •  1.5V


Request for Quote

What type of chip are you designing?
What is the capacity of the ASIC gate included in the design?
5 million-20 million
20 million-50 million
50 million-100 million
100 million-1 billion
More than 1 billion
Which FPGA do you prefer to use?
Xilinx VU440
Xilinx KU115
Xilinx VU19P
Xilinx VU13P
Xilinx VU9P
Intel S10-10M
Intel S10-2800
Not sure, need professional advice
What kind of FPGA configuration do you need?
Single FPGA
Dual FPGA
Four FPGAs
Eight FPGAs
Not sure, need professional advice
What kind of peripheral interface do you need?
How many prototype verification platforms do you need?
Do you need the following tools?
Segmentation tool
Multiple FPGA debugging tools
Co-modeling tool (allows large amounts of data to interact between FPGA and PC host)
When do you need to use our products?
0-6 months
6-12 months
More than 12 months
Not sure
Any additional comments?
Submit
Enter your phone number and we will call you back immediately
Enter your phone
Verification code

This site uses cookies to collect information about your browsing activities in order to provide you with more relevant content and promotional materials, and help us understand your interests and enhance the site. By continuing to browse this site you agree to the use of cookies. Visit ourcookie policy to learn more.