Products
Get to market first with S2C solutions

Memory Modules

Prodigy eMMC Memory Module

Prodigy eMMC Memory Module

  • JEDEC/MMC standard version 5.0 compliant, MMC V4.41 compatible, and fully backward compatible with previous Multi-Media Card system.

  • Support high priority interrupt scheme and back ground operation.

  • Default data bus width is 1-bit, can be configure to 4-bit or 8-bit.

  • Occupies one Prodigy I/O connector


Prodigy DDR4 Memory Module

DDR4 Memory Module: Supports VU/KU Prodigy LM except Single/PCIe

  • DDR4 Memory Module: Supports VU/KU Prodigy LM except Single/PCIe

    DDR4 Memory Module Type D:  Supports A10/S10 Prodigy LS only

  • DDR4 Memory Module Type D:  Supports A10/S10 Prodigy LS only

DDR4 Memory Module for Single VU:  Supports Single VU440 Prodigy LM only

  • DDR4 Memory Module for Single VU:  Supports Single VU440 Prodigy LM only


Prodigy DDR3 Memory Module

DDR3 Memory Module: Supports VU/KU Prodigy LM except Single/PCIe

  • DDR3 Memory Module: Supports VU/KU Prodigy LM except Single/PCIe

    DDR3 Memory Module Type B: Supports A10/S10 Prodigy LS only

  • DDR3 Memory Module Type B: Supports A10/S10 Prodigy LS only

DDR3 Memory Module for Single VU: Supports Single VU440 Prodigy LM only

  • DDR3 Memory Module for Single VU: Supports Single VU440 Prodigy LM only


Pre-tested DDR2/DDR3/DDR4 SO-DIMM Memory Module

  • 2GB DDR2 @ Up to 400MHz clock rate

  • 2GB DDR3 @ Up to 800MHz clock rate

  • 8GB DDR3 @ Up to 800MHz clock rate

  • High speed 8GB DDR4


Prodigy 18MB SRAM Module

Prodigy 18MB SRAM Module

  • Contains two 72Mbit 'NO WAIT' state bus SRAMs

  • Memory width selectable as 36bits or 72bits

  • Up to 117MHz access frequency

  • SRAM I/O Voltage is +1.8V

  • Occupies one Prodigy I/O connector


1GB DDR3 Memory Module for K7 Logic Module

1GB DDR3 Memory Module for K7 Logic Module

  • Two Micron MT41J256M16HA-125 or equivalent DDR3 SDRAM devices

  • On-board 200MHz system clock

  • Up to 800Mbps data rate

  • I/O voltage operating at 1.5V

  • Occupies one LM I/O connector

Request for Quote

What type of chip are you designing?
What is the capacity of the ASIC gate included in the design?
5 million-20 million
20 million-50 million
50 million-100 million
100 million-1 billion
More than 1 billion
Which FPGA do you prefer to use?
Xilinx VU440
Xilinx KU115
Xilinx VU19P
Xilinx VU13P
Xilinx VU9P
Intel S10-10M
Intel S10-2800
Not sure, need professional advice
What kind of FPGA configuration do you need?
Single FPGA
Dual FPGA
Four FPGAs
Eight FPGAs
Not sure, need professional advice
What kind of peripheral interface do you need?
How many prototype verification platforms do you need?
Do you need the following tools?
Segmentation tool
Multiple FPGA debugging tools
Co-modeling tool (allows large amounts of data to interact between FPGA and PC host)
When do you need to use our products?
0-6 months
6-12 months
More than 12 months
Not sure
Any additional comments?
Submit
Enter your phone number and we will call you back immediately
Enter your phone
Verification code

This site uses cookies to collect information about your browsing activities in order to provide you with more relevant content and promotional materials, and help us understand your interests and enhance the site. By continuing to browse this site you agree to the use of cookies. Visit ourcookie policy to learn more.