S2C Debuts eASIC Solutions for Solving ASSP business Challenges at SoCIP Event in China
Sep 25, 2008

S2C Debuts eASIC Solutions for Solving ASSP business Challenges at SoCIP Event in China

Shanghai, China – September 25, 2008—S2C, a solution provider for accelerating System-On-Chip (SoC) Innovations, today announced an agreement to distribute eASIC NEW ASIC products in China. eASIC’s zero mask-charge, no minimum order quantity NEW ASICs address Application Specific Standard Product (ASSP) business challenges such as skyrocketing chip design costs and shrinking product life cycles. Electronics System Designers are invited to attend the first annual SoCIP event in Beijing on October 13th and in Shanghai on October 15th to learn more about reducing the cost of ASSP and ASIC design.

eASIC, a fabless semiconductor company headquartered in Santa Clara, California, offers breakthrough low-cost, high-performance and fast-turn semiconductor devices through its patented single via-layer customizable routing technology. eASIC’s 90nm Nextreme NEW ASIC product was introduced in October 2006 and had more than 120 design-wins within the first 18 months. The latest Nextreme-2 NEW ASIC family is the industry’s first 45nm, zero mask-charge and customizable semiconductor device family that enables SoC designers to integrate up to 20 million logic gates, 30 million bits of memory and 56 6.5Gbps transceivers in a single device. eASIC’s NEW ASIC devices feature a simple design flow using optimized, low-cost Magma tools, and the ability to deliver working devices in four to six weeks.

“Electronics OEMS and ODMs in China need to innovate quickly but continue to drive design costs lower but designing the right ASSP product for fast pace electronic market is increasingly becoming difficult especially when ASSP design costs are skyrocketing. Traditional Standard Cell ASICs are becoming more and more expensive to design as process nodes get lower and this has resulted in dramatic decline in the number of standard cell ASIC-based design starts,” said Jasbinder Bhoot Senior Marketing Director, eASIC Corporation.. “eASIC’s NEW ASIC products enable SoC design companies to overcome their current ASSP business challenges through facilitating shorter development time and a fraction of up-front cost compare to conventional standard cell-based design. As a result, SoC design companies will have much higher rate of meeting the product specifications required by today’s dynamic end consumers and thereby creating profits from the development projects.”

“Through business engagements with many SoC/ASSP design companies in the Far East in the past 5 years, we can clearly see the disproportion between the amount of effort a chip design company needs to invest and the amount of return after factoring in all the risks,” said Toshio Nakama, Chief Executive Officer of S2C. “The biggest risk of all is will the SoC product still meets the market demands after up to 24 months of design cycle and expensive up-front design and manufacturing expense. Most ASSP companies that fail are not because they can’t build the SoC right, but they can’t build the right SoC for the market. We truly believe that it’s time that the ASSP companies take the step to adopt eASIC low-cost, high-performance and fast-turn solution to overcome the business challenges especially when designing using 90nm and more advanced process technologies. ”

About eASIC

eASIC is a fabless semiconductor company offering breakthrough zero mask-charge, no minimum order quantity New ASIC devices dramatically reducing overall cost and production times for customized semiconductor devices. Low-cost, high-performance and fast-turn ASIC and System-on-Chip designs are enabled through patented technology utilizing Via-layer customizable routing. Privately held eASIC Corporation is headquartered in Santa Clara, California. Investors include Khosla Ventures, Kleiner Perkins Caufield and Byers (KPCB), Crescendo Ventures, Advanced Equities Incorporated and Evergreen Partners. For more information, please visit www.eASIC.com

About S2C

Founded and headquartered in San Jose, California, S2C has been successfully delivering rapid SoC prototyping solutions since 2003. S2C provides:

  • Rapid SoC FPGA-based prototyping hardware and automation software
  • Prototype Ready™ IP, Platforms, and Accessories
  • System-level design verification and acceleration

S2C's value is our singular focus on SoC/ASIC development. Our highly qualified engineering team and customer-focused sales force understands our customers’ SoC development needs. S2C’s unique FPGA-based solution, using our patented TAI IP technology, enables designers to quickly assemble FPGA-based SoC prototypes on S2C FPGA boards. This gives customers an early start on software development, typically the long pole item in development schedules. Combining rapid prototyping methodologies with a comprehensive portfolio of Prototype Ready IP and advanced verification and acceleration solutions, S2C solutions greatly reduces the SoC design cycle.

Request for Quote

What type of chip are you designing?
What is the capacity of the ASIC gate included in the design?
5 million-20 million
20 million-50 million
50 million-100 million
100 million-1 billion
More than 1 billion
Which FPGA do you prefer to use?
Xilinx VU440
Xilinx KU115
Xilinx VU19P
Xilinx VU13P
Xilinx VU9P
Intel S10-10M
Intel S10-2800
Not sure, need professional advice
What kind of FPGA configuration do you need?
Single FPGA
Dual FPGA
Four FPGAs
Eight FPGAs
Not sure, need professional advice
What kind of peripheral interface do you need?
How many prototype verification platforms do you need?
Do you need the following tools?
Segmentation tool
Multiple FPGA debugging tools
Co-modeling tool (allows large amounts of data to interact between FPGA and PC host)
When do you need to use our products?
0-6 months
6-12 months
More than 12 months
Not sure
Any additional comments?
Submit
Enter your phone number and we will call you back immediately
Enter your phone
Verification code

This site uses cookies to collect information about your browsing activities in order to provide you with more relevant content and promotional materials, and help us understand your interests and enhance the site. By continuing to browse this site you agree to the use of cookies. Visit ourcookie policy to learn more.