General PeripheralsRequest for Quote

General Peripheral Modules provides a number of most popular interfaces common to most SoC/ASIC such as USB, PCIe, PCI, and Gigabit-Ethernet. The Mictor Interface Module provides convenient probing of Prodigy Logic Module's using an Agilent logic analyzer and the D-MAX Interface Module provides convenient probing of Prodigy Logic Module's using a Tektronix logic analyzer.

 


Prodigy ETM4 Module

 

  • Prodigy ETM4 Module provides one ARM ETM4 interface, one 9-pin UART interface, one Micro SD card socket, one ARM JTAG port and some GPIOs.
  • Occupies one Prodigy I/O Connector.
  • Support VU and KU Prodigy Logic Module directly.

 



Prodigy GPIO Extension Module

 

  • Prodigy GPIO Extension Module provides two RS232s on 3-pin headers, two I2C interfaces, one Mictor-38 connector, one 20-pin ARM JTAG connector, 8 LEDs, 4 push buttons, 8 switches, GPIO on pin headers and 2 channels of GT transceivers through MMCX connectors.
  • Occupies one Prodigy I/O Connector.
  • Support VU and KU Prodigy Logic Module directly.

 


Prodigy Processor Peripheral Module

  • Prodigy Processor Peripheral Module provides common processor peripherals that include NAND Flash socket, NOR Flash socket, SPI Flash socket, EEPROM socket, MicroSD card, ARM JTAG, ART ETM Debugger Trace and user IOs.
  • Occupies one Prodigy I/O connector.
  • Support VU and KU Prodigy Logic Module directly.

 


Prodigy PCI Interface Module

  • Prodigy PCI Interface Module provide 32-bit 3.3V PCI interface.
  • Occupies one Prodigy I/O Connector.
  • Support VU and KU Prodigy Logic Module directly.

 


Prodigy USB Interface Module

  • The Prodigy USB Interface Module enables user designs in S2C Logic Modules to interface to USB3.0 hosts via a PIPE interface and USB2.0 hosts via UTMI or ULPI interfaces.
  • The Module occupies one S2C Prodigy I/O connector.
  • This interface module supports all VU, KU, A10 and S10 Prodigy Logic Modules.

 


Prodigy 3 Channel RGMII PHY Interface Module

Prodigy Logic Module IO Cable (Samtec)

  • Prodigy 3 Channel RGMII PHY Interface Module enables user designs in Prodigy Logic Modules to interface to external 10M/100M/1000M Ethernet PHY in RGMII mode through three Marvell’s 88E1116R chips.
  • Occupies one Prodigy I/O Connector.
  • Support VU and KU Prodigy Logic Module directly.

 


Prodigy 3 Channel GMII Interface Module

Prodigy Logic Module IO Cable (Samtec)

  • Prodigy 3 Channel GMII PHY Interface Module supports GMII Protocols.
  • Occupies one Prodigy I/O connector.
  • Support VU and KU Prodigy Logic Module directly.

 


RS232 Interface Module

  • RS232 Interface Module enables user designs in Prodigy Logic Modules to interface to two RS232 interfaces via on-board GPIO pins.
  • Occupies four GPIO pins on Prodigy Logic Modules.
  • Support VU, KU, V7 and K7 Prodigy Logic Module directly.